InformationDetailsAlternatives/Accessories
 

Dräger-Tubes®

The Dräger-Tubes® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.
9.620 404





9.620 404
 TypeMeasuring
range
PK 
 Acetone 100/bProd.No.9.620 421100 - 12000 ppm10
 Acetone 40/aProd.No.7.615 731400 - 800 ppm5
 Ammonia 0,25/aProd.No.6.056 7740.25 - 3 ppm10
 Ammonia 0,5%/aProd.No.6.300 5650.5 - 10 Vol.-%10
Ammonia 2/aProd.No.9.620 4042 - 30 ppm10
 Ammonia 5/aProd.No.9.620 4055 - 70 ppm
50 - 600 ppm
10
 Ammonia 5/bProd.No.9.620 4245 - 100 ppm10
 Petroleum hydrocarbons 10/aProd.No.9.620 42610 - 300 ppm10
 Petroleum hydrocarbons 100/aProd.No.6.076 365100 - 2500 ppm10
 Benzene 0,25/aProd.No.6.268 6920.25 - 2 ppm
2 - 10 ppm
10
 Prussic Acid 0,5/aProd.No.9.620 4490.5 - 5 ppm
5 - 50 ppm
10
 N-Butanol 10/aProd.No.6.287 56610 - 250 ppm
250 - 2000 ppm
10
 Chlorine 0,2/aProd.No.9.620 4070.2 - 3 ppm
3 - 30 ppm
10
 Ethanol 100/aProd.No.6.284 047100 - 3000 ppm10
 Natural gas testProd.No.6.077 329qualitative5
 Acetic acid 5/aProd.No.6.900 4095 - 8 ppm10
 Hydrogen fluoride 0,5/aProd.No.6.206 0320.5 - 15 ppm
10 - 90 ppm
10
 Formaldehyde 0,2/aProd.No.9.620 4290.2 - 2.5 ppm
0.5 - 5 ppm
10
 Hydrogen peroxide 0.1/aProd.No.6.089 9260.1 - 3 ppm10
Alternate products:
Dräger-Tubes®Dräger Safety AG & Co. KGaA
Dräger-Tubes ®Dräger Safety AG & Co. KGaA


Dräger-Tubes®

The Dräger-Tubes® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.
6.203 543





6.203 543
 
 TypeMeasuring
range
PK 
 Hydrochloric acid 0,2/aProd.No.7.622 7940.2 - 3 ppm10
 Hydrochloric acid 1/aProd.No.9.620 4131 - 10 ppm10
 Hydrochloric/Nitric acidProd.No.9.620 4411 - 10/15 ppm10
 Oxygen 5%/cProd.No.9.620 4485 - 23 Vol.-%10
 Acid TestProd.No.6.070 248qualitative10
 Sulphur dioxide 0,5/aProd.No.9.620 4200.5 - 5 ppm
1 - 25 ppm
10
 Carbon disulphide 3/aProd.No.9.620 4423 - 95 ppm10
 Carbon disulphide 5/aProd.No.6.259 5305 - 60 ppm10
 Hydrogen sulphide 0,2%/aProd.No.6.088 1660.2 - 7 Vol.-%10
 Hydrogen sulphide 0,2/aProd.No.6.085 7940.2 - 5 ppm10
 Hydrogen sulphide 0,2/bProd.No.6.077 3990.2 - 6 ppm10
 Hydrogen sulphide 0,5/aProd.No.6.304 8220.5 - 15 ppm10
 Hydrogen sulphide 1/cProd.No.6.052 6301 - 20 ppm
10 - 200 ppm
10
 Hydrogen sulphide 1/dProd.No.9.620 4431 - 20 ppm
10 - 200 ppm
10
 Hydrogen sulphide 100/aProd.No.6.050 553100 - 2 000 ppm10
 Hydrogen sulphide 2%/aProd.No.6.203 5432 - 40 Vol.-%10
 Hydrogen sulphide 2/aProd.No.6.210 08120 - 200 ppm10
 Hydrogen sulphide 2/bProd.No.7.622 6802 - 60 ppm10
 Hydrogen sulphide 5/bProd.No.9.620 4255 - 60 ppm10
 Toluene 5/bProd.No.9.620 44650 - 300 ppm10
 Trichloroethylene 2/aProd.No.9.620 4472 - 50 ppm
20 - 250 ppm
10
 Water vapour 0,1Prod.No.6.050 7571 - 40 mg/l10


Dräger-Tubes ®

The Dräger-Tubes® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.
9.620 408





9.620 408
 
 TypeMeasuring
range
PK 
 Carbon dioxide 0.5% / aProd.No.6.200 3830.5 - 10 vol .-%10
 Carbon dioxide 100 / aProd.No.9.620 408100-3,000 ppm10
 Carbon dioxide 0.1% / aProd.No.6.088 1650.1 - 1.2% by volume
0.5 - 6% by volume
10
 Carbon dioxide 5% / aProd.No.6.050 5545 - 60 vol .-%10
 Carbon monoxide 2 / aProd.No.9.620 4322 - 60 ppm
23 - 300 ppm
10
 Carbon monoxide 5 / cProd.No.9.620 4095-150 ppm
100-700 ppm
10
 Carbon monoxide 8 / aProd.No.6.088 1628-150 ppm10
 Hydrocarbons 2 / aProd.No.6.240 7012 - 24 mg /m³10
 Mercaptan 0.1 / aProd.No.6.230 6080.1-2.5 ppm
3-15 ppm
10
 Mercaptan 0.5 / aProd.No.6.079 2780.5 - 5 ppm10
 Mercaptan 20 / aProd.No.6.800 61920-100 ppm10
 Methanol 20 / aProd.No.6.284 10220 - 250 ppm
20 - 5000 ppm
10
 Methyl bromide 0.1 / aProd.No.4.675 4525-50 ppm10
 Nitrous fumes 0.2 / aProd.No.6.266 8900.2-6 ppm
5-30 ppm
10
 Nitrous fumes 2 / aProd.No.6.077 3982 - 50 ppm
5 - 100 ppm
10
 Ozone 0.05 / bProd.No.9.620 4340.05-0.7 ppm10
 Ozone 10 / aProd.No.6.058 61920-300 ppm10
 Phenol 1 / bProd.No.9.620 4371 - 20 ppm10
 Phosphines 0.01 / aProd.No.9.620 4380.01 - 0.3 ppm
0.1 - 1 ppm
10
 Sampling tube adsProd.No.6.227 273-1
 I-propanolProd.No.6.287 56750-4000 ppm10
 Mercury vapor 0.1 / bProd.No.9.620 4390.05 - 2 mg /m³10

last visited