| Catalogue | Vacuum technology, Drying, Dry storage | Diaphragm pumps | Pump units-valve controlled | Chemistry Pump Units and Vacuum Systems |
InformationDetailsAlternatives/Accessories
 |
Chemistry Pump Units and Vacuum Systems
Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.
Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports
Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.
With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.
- 100% oil-free pumping of gases
- gas ballast as standard for working with condensable vapours
- good vacuum even with gas ballast
- high vapour tolerance for water and solvents
- long service life, low maintenance
Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports
Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.
With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.
 | |
Chemistry Pump Units and Vacuum Systems |
| Type | Dimensions (W x D x H) mm | max. discharge flow m³ / hr. | Ultimate vacuum without / with gas ballast mbar (abs.) | Connector | PK | |
|---|---|---|---|---|---|---|
| MD 1C + AK + EKProd.No.9.880 828 | 239 x 316 x 405 | 1.3 / 1.5 | 2 / 4 | CEE | 1 | |
| MD 1C + AK + EKProd.No.4.670 345 | 239 x 316 x 405 | 1.3 / 1.5 | 2 / 4 | UK | 1 | |
| MD 1C + AK + EKProd.No.9.880 925 | 239 x 316 x 405 | 1.3 / 1.5 | 2 / 4 | CH | 1 | |
| MZ 2C NT + 2AKProd.No.9.880 832 | 243 x 319 x 309 | 2.0 / 2.3 | 7 / 12 | CEE | 1 | |
| MZ 2C NT + 2AKProd.No.4.670 442 | 243 x 319 x 309 | 2.0 / 2.3 | 7 / 12 | UK | 1 | |
| MZ 2C NT + 2AKProd.No.9.880 844 | 242 x 319 x 309 | 2.0 / 2.3 | 7 / 12 | CH | 1 | |
| MZ 2C NT + AK + EKProd.No.6.234 067 | 242 x 326 x 402 | 2.0 / 2.3 | 7 / 12 | CEE | 1 | |
| MZ 2C NT + AK + EKProd.No.4.670 445 | 242 x 319 x 309 | 2.0 / 2.3 | 7 / 12 | UK | 1 | |
| MZ 2C NT + AK + EKProd.No.9.880 923 | 242 x 326 x 402 | 2.0 / 2.3 | 7 / 12 | CH | 1 | |
| MZ 2C NT + AK + M + DProd.No.6.231 821 | 243 x 310 x 313 | 2.0 / 2.3 | 7 / 12 | CEE | 1 | |
| MZ 2C NT + AK SYNCHRO + EKProd.No.9.880 921 | 243 x 326 x 402 | 2.0 / 2.3 | 7 / 12 | CEE | 1 | |
| MZ 2C NT + AK SYNCHRO + EKProd.No.4.670 449 | 243 x 310 x 313 | 2.0 / 2.3 | 7 / 12 | UK | 1 | |
| MZ 2C NT + AK SYNCHRO + EKProd.No.9.880 922 | 248 x 326 x 402 | 2.0 / 2.3 | 7 / 12 | CH | 1 | |
| MZ 2C NT + AK + EK PELTRONICProd.No.6.260 612 | 243 x 326 x 402 | 2.0 / 2.3 | 7 / 12 | - | 1 | |
| PC 101 NTProd.No.6.701 344 | 243 x 326 x 402 | 2.0 / 2.3 | 7 /12 | CEE | 1 | |
| PC 201 NTProd.No.6.241 292 | 243 x 326 x 402 | 3.4 / 3.8 | 1.5 / 3 | CEE | 1 | |
 | PC 510 selectProd.No.4.665 353 | 243 x 418 x 457 | 2.0 / 2.3 | 7 / 12 | CEE | 1 |
| PC 510 selectProd.No.4.670 456 | 243 x 418 x 457 | 2.0 / 2.3 | 7 / 12 | UK | 1 | |
| PC 510 selectProd.No.6.274 327 | 243 x 418 x 457 | 2.0 / 2.3 | 7 / 12 | CH | 1 | |
| PC 511 selectProd.No.7.983 629 | 243 x 435 x 457 | 2.0 / 2.3 | 7 / 12 | CEE | 1 | |
| PC 511 selectProd.No.4.670 463 | 243 x 435 x 457 | 2.0 / 2.3 | 7 / 12 | UK | 1 | |
| PC 511 selectProd.No.4.670 462 | 243 x 435 x 457 | 2.0 / 2.3 | 7 / 12 | CH | 1 | |
| PC 520 selectProd.No.7.983 628 | 243 x 435 x 457 | 2.0 / 2.3 | 7 / 12 | CEE | 1 | |
| PC 520 selectProd.No.4.670 470 | 243 x 435 x 457 | 2.0 / 2.3 | 7 / 12 | UK | 1 | |
| PC 520 selectProd.No.4.670 469 | 243 x 435 x 457 | 2.0 / 2.3 | 7 / 12 | CH | 1 | |
| MD 4C NTProd.No.6.245 040 | 248 x 326 x 402 | 3.4 / 3.8 | 1.5 / 3 | CEE | 1 | |
| MD 4C NT + AK + EKProd.No.9.880 837 | 243 x 326 x 402 | 3.4 / 3.8 | 1.5 / 3 | CEE | 1 | |
| MD 4C NT + AK + EKProd.No.4.670 506 | 248 x 326 x 402 | 3.4 / 3.8 | 1.5 / 3 | UK | 1 | |
| MD 4C NT + AK + EKProd.No.9.880 924 | 242 x 326 x 402 | 3.4 / 3.8 | 1.5 / 3 | CH | 1 | |
| PC 610 selectProd.No.4.670 516 | 243 x 419 x 457 | 3.4 / 3.8 | 1.5 / 3 | CEE | 1 | |
| PC 610 selectProd.No.4.670 518 | 243 x 419 x 457 | 3.4 / 3.8 | 1.5 / 3 | UK | 1 | |
| PC 610 selectProd.No.4.670 517 | 243 x 419 x 457 | 3.4 / 3.8 | 1.5 / 3 | CH | 1 | |
| PC 611 selectProd.No.4.670 525 | 243 x 435 x 457 | 3.4 / 3.8 | 1.5 / 3 | CEE | 1 | |
| PC 611 selectProd.No.4.670 527 | 243 x 435 x 457 | 3.4 / 3.8 | 1.5 / 3 | UK | 1 | |
| PC 611 selectProd.No.4.670 526 | 243 x 435 x 457 | 3.4 / 3.8 | 1.5 / 3 | CH | 1 | |
| PC 620 selectProd.No.4.670 533 | 243 x 435 x 457 | 3.4 / 3.8 | 1.5 / 3 | CEE | 1 | |
| PC 620 selectProd.No.4.670 535 | 243 x 435 x 457 | 3.4 / 3.8 | 1.5 / 3 | UK | 1 | |
| PC 620 selectProd.No.4.670 534 | 243 x 435 x 457 | 3.4 / 3.8 | 1.5 / 3 | CH | 1 | |
| MD 12C NT + EKProd.No.9.880 965 | 387 x 528 x 395 | 12.0 / 13.3 | 2 / 4 | CEE | 1 | |
| MD 12C NT + EKProd.No.9.880 966 | 387 x 528 x 395 | 12.0 / 13.3 | 2 / 4 | CH | 1 | |
| MD 12C NT + EKProd.No.9.880 967 | 387 x 528 x 395 | 12.0 / 13.3 | 2 / 4 | UK | 1 | |
| MD 12C NT + AK + EKProd.No.9.880 968 | 387 x 616 x 395 | 12.0 / 13.3 | 2 / 4 | CEE | 1 | |
| MD 12C NT + AK + EKProd.No.9.880 969 | 387 x 616 x 395 | 12.0 / 13.3 | 2 / 4 | CH | 1 | |
| MD 12C NT + AK + EKProd.No.9.880 970 | 387 x 616 x 395 | 12.0 / 13.3 | 2 / 4 | UK | 1 | |
| MV 10C NT + EKProd.No.9.880 976 | 528 x 387 x 395 | 9.5 / 10.7 | 0.9 / 1.5 | CEE | 1 |
| Country-specific power cord versions available on request. |
